Assembly step 13
These are the instructions for the SO1 and are here for historical reasons only.
If you are building an SO2, please see the instructions at http://docs.shapeoko.com/
Bill of Material
|Assembly 9||1||From Assembly step 9|
|Assembly 12||1||From Assembly step 12|
User Submitted Notes
If you have problems with the Delrin nut use your hand held portable battery driven drill. Connect it to the short exposed shaft and run the shaft thru the nut back and forth several times to free it up.
The above image does not show belts, which should be mounted in Assembly step 12.