Hello World

Sortable table

Date	User	Serial	Description	Media
11 Oct 2011	Edward Edward	0000a	The very first ShapeOko Hello World
19 Feb 2012	Burke_LaShell	0000b	Hello world complete!
7 Mar 2012	RedOko	0036	Hello RedOko world complete!
25 Mar 2012	DrRob	0035	See Dr. Rob's build on his user page.
Date:	Kosme	0001	description	Media
07 MAR 2012	Miguel	0008	Hello world complete!
02 MAY 2012	Enraged	0047
10 Mar 2012	bxd	0019	Hello world complete! Speed tweaking!
11 Mar 2012	alden	0049	Shapeoko runs 16,000 mm/min
18 Mar 2012	StephenWright	0037	Hello world complete! Think the drivers where over heating at the end, the Oko is messed up
24 Mar 2012	Andre	0022	It's alive! Hooray!
24 Mar 2012	Improbable Construct	0053	First Cut! 3/4" Plywood painted red.
16 Apr 2012	nogthree	0005	Hello worlded ages ago, but forgot to update.
27 Apr 2012	mkellner	0012	First prints.
27 Apr 2012	rmadams	0015	Hello world!
18 June 2012	alpha	0345	Hello world!. Btw I did build the ShapeOko right in front of my PC, in the space you can see in the picture.
23 June 2012	dointhangs	0298	hello world! A 2 day old shapeoko doing its first "complete word" test run, Santa Barbara CA
24 June 2012	randallagordon	0383	Hello World, literally! Created using Grbl Controller.
27 June 2012	SnapFracturePop	0384	Hello, world! Like my kitchen/workshop table?
30 June 2012	SuzieChuzie	0301	Hello World. My first "original" test run.
3 July 2012	aliekens	211	Hello Shapeoko!
3 July 2012	pkropf	502	Wahoo!
3 July 2012	Winder	367	First good drawing.
July 7, 2012	Tom Smith	191	CanuckOko!
09 JUL 2012	AusRobotics	435	Hello Shapeoko! I had alot of test cuts first, but here is one that looks good.
10 July 2012	User:Dwight E	????	Copper Mountain Logo
11 July 2012	User:Marcohess	290	ShapeOko #290 completing a PyCAM generated text job.
14 July 2012	User:Bobt	397	Standard built unit with cable control with ID tag just so it does not get lost. This is a www.Inventables.com kit and I love it.
16 July 2012	User:tgsnyder	447	Hello World in ballpoint ink. Inventables mechanical kit with a grblShield, running slow until I can make the z-axis trace cut mod.
21 July 2012	User:MarkoDiMarko	243	Hello world with a twist ;)