Assembly step 6

(click the picture to download the PDF file)

Instructions

Axis Mount Plate

This is the second part of your pre-assembly.

Assemble this as shown in the drawing:

• Pay attention to the number of washers on each bolt! it's critical.
• Pay attention to the orientation of the plate. The larger holes in the corner (denoted with an arrow) need to be at the bottom (as shown)
• Tighten the non-eccentric vwheels
• Just snug the delrin nut, we'll want to align it with the threaded rod later, then tighten it down

Bill of Materials

Sortable table

Item	Qty.	Part Num.	Title
1	1	MSK01-01	Standard Carriage Plate
2	1	SM-M08	Delrin lead nut.
3	2	MSK01-04	Eccentric Nut
4	4	SM-H04	M5 Hex Nut
6	2	SM-H01	1/4" Nylon Spacer
7	16	SM-H03	M5 Flat Washer
8	4	SM-H08	M5 x 30mm SHCS
9	2	SM-H07	M5 x 10mm SHCS
10	4	MSK01-05A	V Wheel Assembly

User Submitted Notes

(This is the section to add your own notes pertaining to this sub-assembly) If you run into a problem or find yourself asking a question, please post the solution here to help the next person who has the same problem/question)

Instructables build images

Required parts

Delrin nut, spacer, bolts and washer

V-wheel, spacer and washer detail

Back of z-axis

V-wheel, eccentric spacer and washer detail

Complete z-axis